Repository navigation
Releases
0.11.0
Tracefinity 0.11.0 adds outline scaling to the tool editor and fixes photos in which the sheet is small in the frame.
Outline scaling
Type a measured width or height into the tool editor's Size fields, or a percentage, and the whole outline scales to match. Interior rings, cutout positions and the photo underlay follow. Cutouts keep their own size. Use it to correct an outline that traced too large because the object's edge sits above the paper; the photo guide has a new section on tall objects. #258
Photos taken from further away
A phone's main camera at 60 cm or more leaves the sheet covering a small part of the frame, and several steps assumed it fills most of it.
- Accept these photos at the corner step. They were rejected with
image has N pixels; maximum is 64,000,000. #247 - Trace the object, not the sheet, when the sheet covers under 10% of the corrected image, and keep small tools on it. #255
- Keep detected corners on the paper when the saliency mask covers the sheet or bright floor lies beside it. #256
- Check the upload pixel limit before decoding the image, and skip the camera distance warning for photos that are not the full camera frame. #247
Other fixes
0.10.1
Tracefinity 0.10.1 updates dependencies that carry security fixes. Upgrading is recommended for everyone running the Docker image.
Image
- Update Pillow from 12.3.0 to 13.0.0, which fixes 41 advisories, including heap overflows in JPEG, FlashPix and JPEG 2000 decoding. Uploaded images are decoded with Pillow. Earlier images stayed on 12.3.0 because the PyTorch CPU index supplied it; the image now installs it from PyPI. #239
- Update certifi to 2026.10.23 (PYSEC-2026-4320: bundled emSign root CAs with compromised intermediate keys), filelock to 4.2.4 and pip to 26.2.2.
- Include current Debian security updates, among them nginx, expat, curl and libheif.
Frontend
- Update Next.js from 16.3.6 to 16.4.3, which includes the security fixes released in 16.3.8 and 16.4.1. #238
- Update Vite, Vitest and other build and test dependencies to patched versions.
0.10.0
Tracefinity 0.10.0 adds drawer plans and fixes several ways that saved dimensions could differ from exported geometry.
Drawer plans
Arrange project bins in a drawer with 2D and 3D views, grid snapping, rotation, colour coding and automatic arrangement. Save multiple plans per project and check for overlaps or bins that extend outside the drawer. #148
Accuracy and exports
- Detect the visible paper boundary when shadows or a bright tabletop confuse calibration.
- Wait for pending edits to save before generating an export.
- Prevent an older generation from overwriting newer STL or ZIP files. Split ZIP parts now retain the selected pocket depth.
- Include the stacking lip when automatically sizing a bin, so it does not clip the cutout ends.
- Preserve manual outline corrections when changing Detail, rotating, reflecting, undoing or redoing edits.
These fixes are in #234, with additional split-depth regression tests in #235. The test suite measures downloaded STL geometry, including pocket dimensions and depth.
Dependencies
Update Next.js from 16.3.3 to 16.3.6. #231
0.9.4
What's Changed
- build(deps-dev): bump vitest from 4.1.5 to 4.1.11 in /frontend by @dependabot[bot] in #219
- build(deps): bump next from 16.3.1 to 16.3.3 in /frontend by @dependabot[bot] in #220
- docs: document OPENROUTER_URL for OpenAI-compatible naming endpoints by @jasonmadigan in #225
- fix: keep overhanging tools, detect paper on dark backgrounds, mask every object by @jasonmadigan in #226
Full Changelog: 0.9.3...0.9.4
0.9.3
Patch release fixing cutout depth limits and login return navigation.
Fixes
- Stacking-lip cutout depth: enabling the lip no longer reduces usable pocket depth. A 2u bin supports up to 7.25 mm and a 3u bin up to 14.25 mm while preserving the base and a 2 mm floor. Per-cutout overrides and insert allowances respect the same limits; 1u bins are capped at 0.25 mm. The total-height display and guidance are corrected, and cached previews and exports regenerate on the next generation request. (#217)
Full changelog: 0.9.2...0.9.3
0.9.2
Namespace claiming
Creating an account no longer opens onto a storage directory that already
holds files. Previously the refusal only applied to directories carrying a
deletion marker, so an unmarked directory left behind by an interrupted
account creation, or by a volume restored without its account records, could
be claimed by a new account and read and written in full.
Taking over data already on the volume is still possible where that is the
caller's explicit purpose: first-run setup adopting a single-user library, and
create-admin --storage-namespace. It is no longer the default, and an
administrator API token cannot do it at all.
Deployments that issue administrator API tokens should note what a token still
does. It can reset the password of any account that is not an administrator,
which is enough to sign in as that account unless the account has a second
factor. This is the same authority the issuing administrator holds and is not
changed by this release, but it is worth stating plainly: a token is best
treated as equivalent to administrator access to every ordinary account, and
scoped, stored and rotated accordingly.
See docs/auth.md.
What's Changed
- Flush credential stores to disk before returning by @jasonmadigan in #207
- fix(auth): refuse a namespace claim onto an occupied directory by @jasonmadigan in #209
Full Changelog: 0.9.1...0.9.2
0.9.1
Administrator API tokens
Deployments that provision accounts programmatically can now authenticate to
the admin API without an interactive login. An administrator issues a bearer
token from their session; it manages accounts (list, create, disable, enable,
reset password) and nothing else.
A token holds strictly less authority than the session that issued it. It
cannot create an administrator, write to an account that is one, clear a
second factor, or mint another token. Tokens are stored hashed, revocable
individually with effect on the next request, and are made inert immediately
if the issuing account is disabled, demoted or deleted. A password change no
longer revokes them, so automation survives credential rotation.
See docs/auth.md.
What's Changed
- Add administrator API tokens by @jasonmadigan in #206
Full Changelog: 0.9.0...0.9.1
0.9.0
Authentication
Tracefinity now has accounts. Your data is untouched: on first load after
upgrading you are asked to create an administrator, and that account takes
ownership of everything already there. Nothing moves on disk.
Want the old behaviour? Set AUTH_MODE=open and nothing changes.
Also here: two-factor authentication, basic user administration, and
AUTH_SETUP_ENABLED for deployments that create accounts by other means.
Installs behind a trusted reverse proxy (PROXY_SECRET) are unchanged,
though that mode is now deprecated.
Two smaller changes: the generated API documentation (/docs, /redoc,
/openapi.json) is no longer served, and /api/api-keys now requires a
login.
See docs/auth.md.
What's Changed
- Document camera distance in the photo guide by @jasonmadigan in #152
- build(deps): bump next from 16.2.7 to 16.2.11 in /frontend by @dependabot[bot] in #149
- Flag photo problems before tracing by @jasonmadigan in #153
- build(deps-dev): bump postcss from 8.5.10 to 8.5.18 in /frontend by @dependabot[bot] in #154
- Evict _project_store_cache on user deletion by @jasonmadigan in #159
- Delete dead drawer_store.py by @jasonmadigan in #158
- Block store writes racing user deletion by @jasonmadigan in #161
- Add optional STL generation concurrency limit by @jasonmadigan in #175
- Require proxy secret for user namespaces by @jasonmadigan in #179
- Limit decoded image size during ingest by @jasonmadigan in #180
- security: patch 13 dependabot alerts in frontend deps by @jasonmadigan in #182
- ci: fail on next-env.d.ts drift via next typegen by @jasonmadigan in #183
- Add dashboard tool status filters by @noobydp in #162
- fix: make traced outlines visible on the select tools step by @jasonmadigan in #187
- fix: stop discarding failed bin saves silently, log 422 detail by @jasonmadigan in #188
- Replace the grid clamp with resource-aware limits by @jasonmadigan in #190
- Preserve straight edges during outline smoothing by @jasonmadigan in #191
- Restore frontend component tests by @jasonmadigan in #192
- Weld boolean-seam vertices to fix non-manifold STL exports by @1Richter in #164
- Add photo station backend by @noobydp in #135
- Add photo station management UI by @noobydp in #136
- Add product constitution and scope triage by @jasonmadigan in #195
- Roll out product-scope triage by @jasonmadigan in #198
- Add scope re-triage signals by @jasonmadigan in #199
- Reset tool selection when a re-trace replaces the polygons by @jasonmadigan in #202
- Purge generated exports on a configurable retention by @jasonmadigan in #203
- Add native single-user-first authentication by @jasonmadigan in #204
Full Changelog: 0.8.0...0.9.0
0.8.0
What's Changed
- Add OpenRouter provider for automatic tool naming by @1Richter in #146
- Add zoom and pan to the trace polygon editor by @jasonmadigan in #147
New Contributors
Full Changelog: 0.7.0...0.8.0
0.7.0
Self-hosters get finer bin sizing (half-grid and partial bins), automatic tool naming, a Helm chart, and the running app version visible in settings.
What's Changed
Features
- Half-grid bins: 0.5-unit sizes and 21mm half-grid baseplates by @jasonmadigan in #115 (closes #101)
- Partial bins option by @gr3enk in #112
- Optional automatic tool naming by @noobydp in #51
- Helm chart and docker compose enablement by @atoy3731 in #79
- App version shown in settings via /api/version; hide with SHOW_APP_VERSION=false by @jasonmadigan in #145
Fixes
- Keep photo aligned with tool outline under rotation by @jasonmadigan in #131
- Lower cutout resize minimum from 10mm to 1mm by @jasonmadigan in #132
- Default snap to grid to off in bin editor by @jasonmadigan in #133
- Clip tool cutouts at bin interior boundary by @jasonmadigan in #120
- Text label handling renewed to avoid floating geometry by @gr3enk in #127
- Fix label row indexing for fractional grid_y in partial bins by @jasonmadigan in #142
- Skip ONNX on non-AVX CPUs to prevent SIGILL crash by @jasonmadigan in #124
- Helm chart strategy indentation and envFrom default by @jasonmadigan in #126
- Better accessibility for hints and alerts in light mode by @gr3enk in #143
Docs and internal
- Partial bins documentation by @gr3enk in #123
- Clarify GPU optional for local usage; add scope non-goals
- Add CI linting (ruff, eslint, tsc)
- Enforce line endings via .gitattributes by @scesalins in #130
- Bump vite, js-yaml, @babel/core for security alerts by @jasonmadigan in #119
Full Changelog: 0.6.0...0.7.0